All the Strength. All the Beauty.
Introducing
KATANA™ Zirconia ONE
For IMPLANT, For CEREC
“KATANA™ Zirconia ONE For IMPLANT, For CEREC” is newly added to the “KATANA™ Zirconia ONE” series.
Hybrid Abutment Crown or Hybrid Abutment with
ONE block
Multi-Layer technology results in natural tooth-colored restorations
Flexural Strength
932 MPa1
10 shades
available based on VITA classical A1-D4® shade guide
- According to ISO 6872:2015, Three-point flexural strength test, Sample size 1.2x4x14 mm, Span length 12 mm, Source: Kuraray Noritake Dental Inc.
WHAT IS “KATANA™ Zirconia ONE For IMPLANT, For CEREC”?
KATANA™ Zirconia ONE is a pre-sintered zirconia block which is designed for CEREC systems. KATANA™ Zirconia ONE For IMPLANT, Foe CEREC is designed for using as a mesostructure of an implant system, and has an access hole for connecting to the TiBase. It can be fabricated as a hybrid abutment crown or a hybrid abutment. Designed to match the shade guide1, when used as a posterior restoration finished by hand polishing2.
- NW is based on NORITAKE SHADE GUIDE, and others are based on VITA classical A1-D4® shade guide
- When it is used for making anterior restorations, we recommend finishing the restoration by glazing and staining
with dental porcelain such as CERABIEN™ ZR FC Paste Stain for achieving even more aesthetic outcomes.
Discover IMPLANT Block
ESTHETIC AND EASY TO USE
This multi-layered block consists of four layers of zirconia in gradated shades.
This product allows the chair side fabrication of natural-tooth-colored restorations – eliminating additional sintering time. 
TWO TYPES OF RESTORATION OPTIONS IN ONE BLOCK
Hybrid abutment crown
(Screw-retained crown)
Hybrid abutment + crown2
(Cement-retained crown)
KATANA™ Zirconia ONE For IMPLANT, For CEREC can be used as a hybrid abutment crown or a hybrid abutment. With this block, you can create either type depending on the case. For general cases, a hybrid abutment crown can be used. A hybrid abutment, which needs a separately created crown, is used when an implant is placed in an orientation that is not parallel to that of the adjacent teeth, etc.
- When the restoration is to be used as a hybrid abutment, after the tightening with abutment screw and sealing the screw channel intraorally,
cement a crown with a cement that claims to be usable for zirconia. It is recommended to use resin cement to bond the restoration. - The photo of “Hybrid abutment + crown” shows the palatal view.
OUR ORIGINAL RAW MATERIAL
We, Kuraray Noritake Dental, develop our exclusive zirconia powders all within the company. This approach allows us to exercise precise control over both the chemical and physical characteristics, including the concentration of yttria, as well as factors like grain or particle size and the sintering temperature.
KATANA™ Zirconia ONE WORKFLOW
CEREC
CEMENTATION
CEREC
- When using this product, use the following guidelines: CEREC Software 5.2.13 / CEREC Software 5.3.3 / inLab CAM Software 22.7 / inLab CAM Software 24.1 /
inLab CAD Software 22.4.1 or later is required. - It is recommended to work under dry conditions. In cases where the process is performed under wet conditions and using a sintering furnace other than CEREC
SpeedFire, dry the block at 200°C (392°F) for 10 minutes in the sintering furnace, prior to the sintering.
CEMENTATION
It is recommended to cement the restoration with PANAVIA™ SA Cement Universal (White).
| What is the “AC Technique”? The AC Technique with PANAVIA™ SA Cement Universal is introduced for appropriate bonding of zirconia restorations without a primer by Prof. Markus Blatz, DMD, PhD, University of Pennsylvania School of Dental Medicine and his group. It only includes two practical steps: (A) air-particle abrasion and (C) adhesive composite resin. The researchers have originally introduced “the APC technique” to ensure proper bonding process of zirconia, which includes three practical steps: (A) air-particle abrasion, (P) zirconia primer, and (C) adhesive composite resin. |
RESTORATIONS
POSTERIOR RESTORATIONS: HAND POLISHING
ANTERIOR RESTORATIONS: GLAZE BAKING
POSTERIOR RESTORATIONS: HAND POLISHING
For posterior restorations, hand polishing is recommended to match the shade guide. Pre-sinter polishing can also be performed prior to sintering, regardless of finishing method.
ANTERIOR RESTORATIONS: GLAZE BAKING
For anterior restorations, we recommend finishing by glazing and staining with dental porcelain such as CERABIEN™ ZR FC Paste Stain to realize aesthetic results.
RELATED PRODUCTS
CERABIEN™ ZR FC Paste Stain
CERABIEN™ ZR FC Paste Stain is a paste-type stain (surface stain)
which allows for easy characterization of full zirconia, as well as both layered and pressed zirconia. It is recommended for dental technicians and dentists that want to further characterize sintered zirconia.
PANAVIA™ SA Cement Universal
PANAVIA™ SA Cement Universal contains MDP in the paste and can be used to cement zirconia crowns without a separate primer/silane. This special long chain silane coupling agent in the paste eliminates the need for a separate silane bottle.
KATANA™ Cleaner
KATANA™ Cleaner is a universal cleaner with unique MDP salt technology that can be used to clean zirconia after intra-oral try-in. It has a pH of 4.5 that can be used intra-orally as well, to clean preps. These features truly make it a universal cleaner.
BLOCK SIZE
KATANA™ Zirconia ONE For IMPLANT, For CEREC comes with two types, S and L. The difference between S and L is the diameter of the access hole. The block size is the same.
- Block sizing may have individual slight differences but will be adjusted automatically by the software.